Skip to main content
Image

极速飞艇单期计划

DTS10_Cylindrical_Bush_With_Machined_Lubricant_Grooves
DTS10_Flanged_Bearing
DTS10_Special_Bearing
DTS10_Plate_Bearing
DTS10_Washer_Bearing

极速飞艇复试计划

  • Chemical Resistance
    Chemical Resistant
  • Suitable for Continuous Sliding Rotation
    Suitable for Continuous Sliding, Rotating and Oscillating Movement
  • Simply Assembly
    Simple assembly
  • Reduced System Cost
    Reduced System Cost
  • Quiet Operation
    Quiet Operation
  • Lubricated Operation
    Lubricated operation
  • Increased Wear Resistance
    Increased Wear Resistance
  • Extended Service Life
    Extended service life

极速飞艇开奖预测

  • The first polymer-lined precision bearing for lubricated conditions offering low friction and high wear resistance that is designed to be machined on-site for tight tolerances
  • Excellent wear resistance and low friction in lubricated hydraulic applications
  • Excellent chemical resistance, fatigue strength, cavitation and flow erosion resistance, and good behavior in dry start-up conditions
  • A minimum overlay thickness of 0.1 mm permits, under carefully controlled conditions, machining of the assembled bore for improved dimensional tolerance and reduced geometric defects, while retaining a thin layer of PTFE sliding surface
  • Compatible with most standard machining processes including turning, broaching, reaming, and milling

 
AVAILABILITY

Bearing forms made to order: cylindrical bushes, thrust washers, sliding plates, half-bearings, special shapes obtained by stamping, bearings with locating notches, lubricant holes and machined grooves, customized bearing designs

Datasheet
GGB DTS10 - Metal-Polymer Composite Bearing Material
Brochure
GGB DTS10® - Metal-Polymer - Precision Bearings and Bushes for Lubricated Applications

极速飞艇遗漏

Choose the product I want to compare
DTS10
Dry Operation Fair
Lubricated Operation Very Good
Greased Operation Fair
Machinable Applicable
RoHS Compliant Compliant
Standard Sizes Not Available
Application Excellence
DP4®
Good
Very Good
Good
Consult with Applications Engineer
Compliant
Available
DP31
Fair
Very Good
Fair
Consult with Applications Engineer
Compliant
Not Available
DU®
Very Good
Good
Fair
Consult with Applications Engineer
Not compliant
Available
HI-EX®
Fair
Good
Very Good
Applicable
Compliant
Not Available

极速飞艇号码走势图

  • Metal-Polymer Composite Material
  • Steel Back
  • Porous Bronze Sinter
  • PTFE
  • Fillers

极速飞艇官方预测

极速飞艇网上

  • General

    BEARING PROPERTIES Value Unit
    Maximum load, p
    - Static 140 20000 N/mm2 psi
    - Dynamic N/mm2 psi
    Operating Temperature
    - Min -200 -328 °C °F
    - Max 280 536 °C °F
    Fluid Lubricated
    Maximum sliding speed, U 10 2,000 m/s fpm
    Maximum pU factor 100 * 2,860,000 N/mm² x m/s psi x fpm
    Coefficient of friction 0.01 - 0.08 0.01 - 0.08
    Recommendations
    Shaft surface roughness, Ra
    - Lubricated ≤ 0.05 - 0.2 * ≤ 2 - 8 * µm µin
    - Shaft surface hardness >200 >200 HB HB
    For Superior Performance Value
    Dry GAR-MAX / HSG / GAR-FIL / MLG
    Grease lubricated DX / DX10
    Water lubricated HPM / HPF / DP4-B
    * Depending on operating conditions

极速飞艇官网平台

Our experts are ready to help you find the right solution for your specific application.

极速飞艇龙虎走势图 澳洲10开奖规律 澳洲幸运10稳赚方法 极速飞艇开彩奖走势图 快乐飞艇开奖最快结果 极速飞艇开奖号 秒速飞艇投注计划 快乐飞艇app登录